Dry Riser Installation in Clayton

When Should A Dry Riser Be Installed?

Dry Riser Installation in Clayton is performed in buildings that are under 50 meters in height and over 18 meters in height. They are usually installed into buildings for the purpose of fighting fires. They are charged with water using fire service equipment or if they have permission from the local council they will use the mains water system. Dry risers are installed in buildings in a fire resistant shaft, they are installed with an inlet breeching connector on the ground floor or at the fire service access level, they have landing valves at particular spots on every floor so the fire service can access them easily.

How Does A Dry Riser Work?

Dry Riser Installation in Clayton works by filling the pipe with water that is pressurised by connecting the hose to the breeching inlet that is usually in a cabinet on the first floor of the building. They then use a hose that is connected to the nearest water supply to spray directly onto the fire.

What Is the Difference Between a Dry Riser and a Wet Riser?

The difference between a dry riser and a wet riser is that a dry riser fills with water when needed, which is then dispersed to other floors, whereas a wet riser is constantly kept charged with water. Dry Riser Installations in Clayton are found in buildings that exceed 18 metres in height, whereas wet risers are found in buildings that tower over 60 metres tall.

How Do You Test A Dry Riser in Clayton?

There are a few different methods of testing a dry riser, and all are necessary and required by British fire safety regulations. These different methods include visual inspections, pressure testing, and wet testing.Visual inspections are required every six months, and pressure testing/wet testing is required annually.

What Is A Dry Riser Visual Inspection?

A dry riser visual inspection involves visually checking each component in a dry riser to make sure that everything is safe and in working order. This involves checking that valves are lubricated correctly and not seized up, and the check extends to the cabinets in which the valves can be found, which also require visual confirmation of being in working order.

For more information regarding Dry Riser Installations in Clayton, please get in touch today!